PART |
Description |
Maker |
NW6003 |
TYPE II CALLER ID DECODER
|
Integrated Device Technology, Inc.
|
NW6003 |
TYPE II CALLER ID DECODER
|
IDT[Integrated Device Technology]
|
SM8222BP SM8222AP SM8222 SM8222BS SM8222AS SM8222A |
Caller ID Service IC with Call Waiting
|
http:// NPC[Nippon Precision Circuits Inc] Seiko NPC Corporation
|
NW6003 NW6003_DS_23506 |
Type II Caller ID Decoder From old datasheet system
|
IDT
|
IXTH6N80 IXTM6N80 6N80 IXTM6N80A IXTH6N80A |
N-Channel Enhancement Mode 32-Bit Microcontroller IC; Controller Family/Series:(ARM9); Number of I/O Pins:24; ADC Channels:5; Number of Timers 8/12/16/32 Bits:0 / 0 / 2 / 1; Number of PWM Channels:1; Clock Speed:200MHz; Interfaces:AC97, I2S, SPI, UART, USB
|
IXYS[IXYS Corporation] ETC[ETC]
|
NW6006 NW6006-XS |
ENHANCED TYPE II CALLER ID DECODER WITH STUTTER DIAL TONE DETECTOR TELEPHONE CALLING NO IDENT CKT, PDSO20
|
Integrated Device Technology, Inc.
|
22-01-1104 |
Connector Housing; Gender:Female; Number of Contacts:10; Series:5102-N; Body Material:PA Polyamide (Nylon) 6/6; Number of Rows:1; Pitch Spacing:2.5mm
|
Molex
|
19-09-2127 |
Multipole Connector; Number of Contacts:12; Series:Standard .093"; Body Material:Nylon 6/6; Number of Rows:2 12 CONTACT(S), MALE OR FEMALE, POWER CONNECTOR, PLUG
|
Molex, Inc.
|
MPC7455RXNXPNS |
MPC7455 Part Number Specification for the XPC74x5RXnnnNx Series part number spec
|
Motorola
|
1728720000 |
Terminal Block; Pitch Spacing:3.5mm; Wire Size (AWG):28-16; Leaded Process Compatible:Yes; Number of Contacts:24; Number of Rows:2; Series:S2L; Operating Voltage:150V 24 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER
|
Weidmuller, Corp.
|